2012 Ford Fusion
Mileage
85,125
Service Date
8/8/2025
Services Performed
- We went to test the a/c and found the vehicle will not blow air at all. We then went to visually inspect the blower motor and found the connector to be worn out causing a bad connection. With slight pressure we could get the blower to work but it is very weak indicating a worn blower motor as well. We recommend replacing the blower motor and connector to start. After repairs are made we will continue to check the a/c system to make sure it is blowing cold. After our repairs were made we found the a/c system blows cool but not cold we then with a black light inspected the system for leaks and found a hose that goes from the compressor to the condensor is leaking. This piece also has a seperate line that goes from the compressor to the line with the low side service port on it and it is all one piece. We recommed an a/c service and replacing the line assembly.
- BLOWER MOTOR ASSEMBLY -and Replace the blower motor connector.
- AIR COND HOSE – Remove & Replace – Suction & Discharge Hose Assembly – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
- Service air conditioner. Check condition of all belts and lines. Evacuate and recharge with reclaimed R-134. Test system performance. Note center vent temp Max Cool/High___49______ Connect gauge set and advise of High and Low pressures @ 1500 Rpm. Ambient______98_______High_____125______Low____35______ Inspect Belts, hoses, fan clutch, and electric fans if equipped and advise of recommendations.
Dean Y. gave our service a 5 star review on 8/8/2025
