2006 Jeep Wrangler
Mileage
103,889
Service Date
11/12/2020
Services Performed
- We tighten two pin's. One from the front and one from the back. Everything is working correctly at this time. If it will not hold we will have the to the fuse block. We found no power from the PCM to the transmission relay. We found a bad connection at connector #4 at the PCM. We applied dielectric grease and reconnected. It still has codes but the transmission is shifting through all gears. The vehicle still has two codes: PO218-High temp Operation Activated P1604-PCM internal Dual Port RAM Integrity failure.
Mike N. gave our service a 5 star review on 11/30/2020
