2007 Toyota Tacoma
Mileage
153,485
Service Date
10/20/2020
Services Performed
- CRANKSHAFT POSITION SENSOR – Remove & Replace – PreRunner,V6 w/A/C Compressor Removal – [Includes: R&I Air Conditioning Compressor. DOES NOT include Air Conditioning System recover, evacuate and recharge.]
- ELECTRONIC CONTROL MODULE – Remove & Replace – ECM
- We scanned the computer and have the following codes: PO335-Crankshaft Position Sensor "A" Circuit. When we snapped the throttle we can get the check engine light to come on. We checked the scanner and the crankshaft position code comes on. We then tested the sensor and find it out of range. We recommend replacing the sensor. We replaced the sensor and cleared the codes. We test drove the vehicle and during our test drive we snapped the throttle and the check engine light came back on. We scanned the computer and found that it appeared that the computer was not recognizing the crankshaft positioning senor circuit. The computer appeared to see half the sensor reading. We felt that the computer was also the problem. We recommend replacing the computer (PCM). We replaced the computer and then had the computer flashed. We test drove the vehicle again and snapped the throttle and the check engine light came back on again. We scanned the computer and the code PO335-Crankshaft positioning sensor circuit code came back on.
- Fuel
- Program Computer
Darin L. gave our service a 5 star review on 10/21/2020
