Ford

Home / Ford / Page 3

We Service and Repair all Ford cars

  • 2006 Ford Pickup

    Ford Pickup
    Mileage
    68,639
    Service Date
    4/5/2021
    Services Performed
    • We checked the voltage and it is charging at 14.3 volts. We have found the battery terminals dirty and need to be serviced. We cleaned the cable ends and terminals as required.
     
    Orlo S. gave our service a 5 star review on 4/5/2021
  • 2005 Ford Escape

    Ford Escape
    Mileage
    217,426
    Service Date
    4/2/2021
    Services Performed
    • We scanned the computer and have the following codes: PO171-System to lean (Bank1) We traced and found a vacuum line broken in two spots. from the intake to the purge valve. We replaced the hose and cleared the codes.
     
    Jeff B. gave our service a 5 star review on 4/2/2021
  • 2015 Ford F-350 Super Duty

    Ford F-350 Super Duty
    Mileage
    187,432
    Service Date
    3/15/2021
    Services Performed
    • Pre purchase Inspection
     
    Nathan F. gave our service a 5 star review on 3/15/2021
  • 2010 Ford Econoline

    Ford Econoline
    Mileage
    131,790
    Service Date
    3/8/2021
    Services Performed
    • Blown out spark plug in the #3 cylinder. We need to instaLL A new insert and then install a new spark plug. We would recommend replacing all of the spark plug's because this seems to start a trend with the other plugs but the customer declined at this time.
    • Clean and repair cylinder #3 so we can install a new insert and then install a new spark plug.
     
    Gary J. gave our service a 5 star review on 3/9/2021
  • 2004 Ford Pickup

    Ford Pickup
    Mileage
    212,195
    Service Date
    11/18/2020
    Services Performed
    • Customer repair the positive cable from battery to battery and build a cable assembly.
     
    Frank R. gave our service a 5 star review on 11/18/2020
  • 2017 Ford Fusion

    Ford Fusion
    Mileage
    13,472
    Service Date
    10/14/2020
    Services Performed
    • FRONT BRAKES @ ___10___MM REMAINING REAR BRAKES @ _8___MM REMAINING
     
    JOYCE W. gave our service a 5 star review on 10/21/2020
  • 2013 Ford Mustang

    Ford Mustang
    Mileage
    68,483
    Service Date
    9/17/2020
    Services Performed
    • Check for a fluid leak in the right front corner of the engine and advise.
    • THERMOSTAT &/OR GASKET – Remove & Replace – V8,5.0L Eng Lower Housing
    • WATER PUMP – Remove & Replace – V8,5.0L Eng
     
    Christian R. gave our service a 5 star review on 9/17/2020
  • 2007 Ford Expedition

    Ford Expedition
    Mileage
    142,672
    Service Date
    9/14/2020
    Services Performed
    • FRONT BRAKES @ ___5___MM REMAINING REAR BRAKES @ __6___MM REMAINING
     
    Susan P. gave our service a 5 star review on 9/15/2020
  • 2006 Ford F550 Super Duty

    Ford F550 Super Duty
    Mileage
    99,900
    Service Date
    4/20/2020
    Services Performed
    • FUEL INJECTOR – Remove & Replace – Each Additional – [Includes: Component test.]
    • FUEL INJECTOR – Remove & Replace – One,Right Side – [Includes: Component test.]
    • MASS AIR FLOW SENSOR – Remove & Replace – All Applicable Models – [Includes: Component test.]
    • We scanned the computer and have the following codes: PO281-Injector-7 PO263-Injector-1 PO275-Injector-5 PO098-Mass air flow sensor. We recommend the three injectors on the passenger side, mass air flow sensor, and then boost hose from the inner cooler to the intake that has a split in it.
     
    Manny P. gave our service a 5 star review on 4/20/2020
  • 2005 Ford Pickup

    Ford Pickup
    Mileage
    39,000
    Service Date
    1/17/2020
    Services Performed
    • Customer requests we install a new updated EGR cooler unit.
    • FRONT BRAKES @ ___6___MM REMAINING REAR BRAKES @ __7___MM REMAINING
    • FUEL FILTER – Remove & Replace – F250 Super Duty,F350 Super Duty,V8,Diesel,6.0L Eng Both – [Includes: Bleed System.]
    • We scanned the computer and have the following codes: P0611-Fuel injection control module P1000-OBD2 System Incomplete P1378-Fuel injection control module supply voltage. We removed the FICA unit and disassembled the unit. We have found that the old unit has burnt up internally. That is why the 50 amp fuse kept blowing. We installed a new unit and programmed it to the vehicle. Then retest the vehicle and now no codes are present at this time.
     
    John A. gave our service a 5 star review on 1/17/2020